Bauer 65 PCB

- 1.6mm Thick
- Includes USB-C breakout board and JST Connector Cable
- Support PCB mount stabilizers

LAYOUTS
Hybrid MX/EC (DYNA65-BAUER)
- Supports both full and split backspace
- Supports regular and stepped caps lock
- Supports Bauer Blocker WKL 7u bottom row
- Support "Normie" 65% WK 6u bottom row

HE (Geon Works VENOM65HE)
- Supports only standard 6.25u 65% bottom row
- Supports only full backspace
- Support only standard caps lock

Solderable MX (MX65-OT)
- Supports both full and split backspace
- Supports regular and stepped caps lock
- Supports Bauer Blocker WKL 7u bottom row
- Supports "Normie" 65% WK 6u bottom row
- Supports 65% 6.25u bottom row

HYBRID DYNA65-BAUER
- Type: MX/EC
- VIA Compatible
- QMK Compatible

HE VENOM65HE
- Type: Hall Effect
- RISC-V32 Architecture
- Supports 8KHz polling rate / 14KHz per-key scan rate
- 0.16ms Latency
- Geon Firmware
- Compatible Switches: Geon Raptor HE, RAW HE, Lucifer HE
Gateron KS-20 / KS-20T, etc., N-pole switch, 1600gs or less at bottom magnetic force

Color of PCB may not match the renders. Final color will be Omnitype Bone.

Some PCBs may arrive with a slight warp from manufacturing, but this will straighten itself out once the entire board is built. This is not considered a defect.

Do not install switches in the hot-swap PCB when inside your keyboard. This risks popping off a hot-swap socket. It is best practice to install your switches on a deskpad or other soft surface to support to socket as you push the switch in.